Walter Brend
Tactical Fighters
Click on photo for enlargement
WALTER BREND: MODEL 2,  8 1/2" double hollow ground fighter style blade, stainless steel guard, black micarta scales, double edge, D-2 finish, full tang, thong hole. Comes with a Frank Sigman kydex lined, cordura nylon sheath.

This is the "Classic" from Walter!

PRICE: $3,200.00 WB01518_.gif (392 bytes)  IN STOCK

 

brendftrmdl2t.jpg (4104 bytes)
WALTER BREND: MODEL 2 SUB-HILT-FIGHTER:  8 1/2" double hollow ground  fighter style blade, Stainless Steel guard and sub-hilt. Green Micarta scales, double edge, D-2 steel, satin finish, full tang, thong hole. Comes with a Custom Made Kydex and Cordura Nylon Sheath.

There is a small scratch on the very bottom of the logo, you can't see it in the picture.  This is from the Kydex in the sheath.

Walterboro Logo

SOLD

brendwSHFt.jpg (7771 bytes)
 

 

WALTER BREND: DAGGER, 7 1/2" double hollow ground Dagger style blade, stainless steel guard, black micarta scales, double edge, D-2 finish, full tang, skull crusher. Comes with a custom made  sheath.

SOLD

brenddaggert.jpg (5260 bytes)brenddaghdlt.jpg (8355 bytes)
 

 

WALTER BREND: 20th ANNIVERSARY HATCHET:  13" full length double hollow ground tomahawk style blade, 7" head length, black canvas micarta scales, double edge, CPM 3V steel, two-tone satin finish, full tang, thong hole.

This Hatchet comes with the standard Kydex belt sheath.  Serial Number 27

This Limited Run has long been sold out!

SOLD

brendhatchanivt.jpg (6669 bytes)brendhatchannivt.jpg (6791 bytes)brendannivt.jpg (17037 bytes)
WALTER BREND: MODEL 2,  8 1/2" double hollow ground fighter style blade, stainless steel guard, black micarta scales, double edge, D-2 finish, full tang, thong hole. Comes with a Frank Sigman kydex lined, cordura nylon sheath.

This is the "Classic" from Walter!

SOLD

brendftrmdl2t.jpg (4104 bytes)
 

 

WALTER BREND: MODEL 5 SUB-HILT-FIGHTER:  8 3 /4" double hollow ground upswept fighter style blade, Stainless Steel guard and sub-hilt. double edge, D-2 steel,  satin finish, full tang, thong hole. Comes with two custom made leather sheaths.

Alabama Logo

SOLD

brendshftft.jpg (4853 bytes)brendshfhdlt.jpg (8780 bytes)
WALTER BREND: MODEL 2 SUB-HILT-FIGHTER:  8 1/2" double hollow ground  fighter style blade, Stainless Steel guard and sub-hilt. double edge, D-2 steel,  satin finish, full tang, thong hole. Comes with a Custom Made Kydex and Cordura Nylon Sheath.

Walterboro Logo

SOLD

brendtfm2SHFt.jpg (4906 bytes)
 

 

WALTER BREND: MERRILL'S MARAUDER,  7 1/4" hollow ground fighter style blade, integral double guard guard and sub-hilt, black micarta scales, single edge, D-2 finish, full tang, thong hole. Comes with a custom made Kydex lined Cordura Nylon sheath.

This knife was originally made for and tested by the US Army Rangers at FT. Benning Georgia.

SOLD

Brend-M-Maurt.jpg (4780 bytes)brend-MMau-hdlt.jpg (6763 bytes)brend-MMar-crestt.jpg (15256 bytes)
WALTER BREND: VANGUARD ELIMINATOR DAGGER, 5" double hollow ground Dagger style blade, stainless steel guard, black micarta scales, double edge, D-2 finish, full tang, skull crusher. Comes with a custom made multi-position kydex sheath w/belt clip.

PROTOTYPE

SOLD

brendElimindagr01t.jpg (5835 bytes)
 

 

WALTER BREND: MODEL 2,  6 1/2" double hollow ground fighter style blade, stainless steel guard, black micarta scales, double edge, D-2 finish, full tang, thong hole. It comes with a custom made Kydex lined Cordura nylon sheath.

This is a version of the Classic Model 2 you see very rarely.

SOLD

brendbmftrt.jpg (5281 bytes)brendbmftrhdlt.jpg (6634 bytes)
WALTER BREND: BOOT,  3 1/2" double hollow ground fighter style blade, integral single guard, skeletonized handle, ATS-34, satin finish, single edge.  Oveall length is 7 3/4". Comes with a Kydex sheath. There were only 25 of these made.

SOLD

brendskeltont.jpg (2864 bytes)
WALTER BREND: VANGUARD "POST MORTEM,"

8 1/2" double hollow ground re-curve style blade, stainless steel guard, black micarta scales, D-2, satin finish, double edge and thong hole. 

This knife is the "little brother" of the DOA!

This limited Vanguard/Brend collaboration of 20 knives.  Is sure to be a favorite among collectors and users for years to come.

SOLD

Brend-PostMort.jpg (14982 bytes)vanguard2sm.jpg (8972 bytes)
WALTER BREND: VANGUARD D.O.A., 10 1/2" double hollow ground re-curve style blade, stainless steel guard, black micarta scales, D-2, satin finish, double edge and thong hole. 

This knife features a massive blade 10 1/2" X 1/4" X 2",  is capable of doing a multitude of tasks...and doing them very well!

This limited Vanguard/Brend collaboration of 20 knives.  Is sure to be a favorite among collectors and users for years to come.

  SOLD

vanguard2sm.jpg (8972 bytes)
brendDOAt.jpg (10997 bytes)
Home Knife Index Order RCC Exclusives
Business Services E-Mail Us Show Calendar Meet Les Robertson